In version 1.1.1 it was added support for the KISSlicer: to use this slicer program you have to check the menu item "Slice & Exit" under the "Preferences" menu of KISSlicer.
In version 1.1.3 it was added support for Linux OS.
In version 1.1.4 preferences have been modified.
In version 1.1.5 the 3D view has been enhanced a little.
In version 1.1.7 there are MANY improvements.
In version 1.2.2.1 graphical interface has been translated to various languages.
In version 1.2.3 g-code sending to serial port has been improved.
In version 1.2.3.2 g-code sending to serial port has been improved, changed download links
RebRep has been tested on:- Computer
- Acer Aspire 7540G
- AMD Athlon II Dual Core M300 2.00 GHz
- RAM 4 GB
- Windows 7 64 bit
- Windows XP 32 bit
- Ubuntu 10.10 (live cd and virtualized)
- Xubuntu 12.10 64 bit (virtualized)
- RepRap Mendel Prusa
- RAMPS 1.2
- Firmware Sprinter
- Heater Arcol.hu
- Serial baudrate 38400
- Material transparent PLA
- Skeinforge 4 settings:
- Filament Diameter 2.8
- Filament Packing Density 1.0
- Layer Thickness 0.4
- Feed Rate 10
- Flow Rate 6
- Travel feed rate 30
- Temperature 200
- A fast x86 CPU
- A screen resolution of at least 800x600 pixels
- A 3d printer if you want to print something
- Windows or Linux with X11
- OpenGL shared libraries
- Skeinforge or Slic3r or KISSlicer
- Download
Rebol
for
Linux, and install it, then try to start Rebol
- If you are not able to start rebol or even install it, probably because you are using a 64bit OS then
- In a terminal write:
-
sudo apt-get update
sudo apt-get install ia32-libs
- and then:
-
sudo apt-get install xfonts-75dpi
sudo apt-get install xfonts-100dpi
sudo fc-cache -f -v
- and then logout and login again
- Download
RebRep for
Linux, and run it
- Place it in your home folder and
make it executable or start it from a terminal window.